Details of the elevator car cabin

⑴Classification of car
①Classification by application
Passenger car cabin, freight car cabin, residential elevator car cabin, bed elevator car cabin, car lift cabin, sightseeing elevator car cabin and sundries elevator car cabin
②by way of opening the door.
Automatic door car, manual door car, semi automatic door car.
③According to the door structure form
Middle door car, double folding or seventy percent off side door cage, hinge door car, straight door cage.
④According to the bottom structure
Fixed cage and movable cage of car.

⑵The composition and general provisions of the car
Elevator car is a metal box frame device for carrying passengers or cargo.
①Car composition
The car is generally made up of the car frame, the bottom of the car, the car wall, the top of the car, the door and the door opening machine.
The car frame is composed of the upper beam, lower beam, column and brace etc..
The upper and lower beams are fixed with a guide shoe, and the car is guided to move up and down along the guide rail, and the horizontal position of the car in the well is maintained.
②General provisions of the car

In order to ensure the function of the car to meet all kinds of requirements, the geometric size of the car has the corresponding requirements.All kinds of car in addition to the internal net height of the ladder is at least 2000mm.

Usually, the net height of the elevator is 2000mm.Passenger lift due to the top of the need for a net height of 2400mm. Residential elevator to meet the handling of the internal height of the furniture is generally 2400mm.The net height of the car door is at least 2000mm.

The car is generally the ratio of width to depth of passenger car width and depth is small, in order to increase the width of door, convenient passenger access.The bed ladder car is to meet the need of carrying bed, the depth is not less than 2500mm, the width is not less than 1600mm. Cargo compartment can be determined according to the delivery object of different width depth dimensions.

③Car baseboard

In order to prevent the car floor or floor to open the door before the end after the car is out of door sill due to shear damage toes, each car sill shall be fitted with baseboard, its width should be equal to the corresponding layer the whole width net station entrance.

④Car wall, car floor and roof structure requirements

The car wall, the car floor and the top of the car shall have sufficient mechanical strength, and shall be fully closed.

⑤Emergency alarm device

In order to make passengers can effectively to the outside car for help in time of need, should be installed in the car passengers can easily be identified and touch alarm device.

⑥Car lighting

Car should be equipped with permanent electrical lighting, so that the lighting on the control device should be not less than 50LX, car floor lighting should not be less than 50LX.

⑦Car top requirements and device on the top of the car

Car top should have a certain mechanical strength, can support two people.Maintenance operation control device, stop switch and power supply socket should be installed on the top of the car.